Custom domain guide
How to connect a Squarespace Domains domain to Netlify
The exact records to add at Squarespace Domains, written the way its form asks for them, for both www and the bare domain.
Checked 16 October 2026
In short
The records you'll add
- Type
- ALIAS
- Name
- Data
- Type
- CNAME
- Name
- Data
Replace the capitals with your own value from the host's dashboard.
| Type | Name | Data |
|---|---|---|
| ALIAS | ||
| CNAME | Replace the capitals with your own value from the host's dashboard. |
Step by step
Set it up
- 1
Add the domain in Netlify first
In Netlify, go to Site→Domain management→Add a domain and enter your domain (for example www.example.com). Adding either the bare domain or www adds both, so set up records for both. Netlify recommends www as the main address with outside DNS.
Check the exact values under Domain management, Pending DNS verification.
Custom domains are included on the free plan.
- 2
Open the DNS records at Squarespace Domains
Sign in, then go to Domains→your domain→DNS→DNS Settings→Custom Records
The domain has to use Squarespace's nameservers (Nameserver Connect).
- 3
Clear what's in the way
Domains come with a "Squarespace Defaults" group that points the domain at a Squarespace site. Delete it (the trash icon next to Squarespace Defaults) if the domain is moving away from Squarespace.
- 4
Add the record for www
Click Add record and add:
- Type
- CNAME
- Name
- Data
Replace the capitals with your own value from the host's dashboard.
Type Name Data CNAME Replace the capitals with your own value from the host's dashboard.
- 5
Point the bare domain
Squarespace Domains has an ALIAS record, which can point the bare domain at a hostname. It keeps working if Netlify changes its addresses.
- Type
- ALIAS
- Name
- Data
Type Name Data ALIAS - 6
Wait, then check
Changes at Squarespace Domains take effect within 48 hours. Once Netlify sees the records, it issues the certificate for https by itself. Use the check below to see what the world sees.
Check your domain
Once the records are in, see whether the world can see them pointing at Netlify.
Changes can take from a few minutes to a day to show up everywhere.
Good to know
Common snags
- To add an ALIAS record, first turn off DNS Security Extensions under DNS, then DNSSEC.
- Squarespace asks for your password again before adding a record.
- A CNAME can't use @ as its name.
Still not working?
Questions
Before you start
Should I use www or the bare domain with Netlify?
Adding either the bare domain or www adds both, so set up records for both. Netlify recommends www as the main address with outside DNS. www always works with a single CNAME; the bare domain depends on what Squarespace Domains offers, covered in step 5.
Why does my site show a certificate error?
The certificate is issued once Netlify sees your records, which can take a while after DNS changes. If it stays, check for old records on the same name (parking pages, AAAA records) and, at Cloudflare, that the record is set to DNS only.
Will this affect my email?
No. Email uses MX records, which these steps don't touch. Only change the records for @ and www.
Rather skip git and build settings?
99helpers puts a file, a folder or a built site online in seconds, then a single CNAME connects your domain, with passwords, analytics and AI editing built in.
Connect a Squarespace Domains domain to 99helpersOr skip the setup
Drop it in. It's online in seconds.
A file, a folder or a whole site: 99helpers puts it online at its own address, with no git, no build settings and no DNS to start with. Add your own domain whenever you're ready.