Custom domain guide
How to connect a Name.com domain to Render
The exact records to add at Name.com, written the way its form asks for them, for both www and the bare domain.
Checked 16 October 2026
In short
The records you'll add
- Type
- ANAME
- Host
- leave empty
- Answer
Replace the capitals with your own value from the host's dashboard.
- Type
- CNAME
- Host
- Answer
Replace the capitals with your own value from the host's dashboard.
| Type | Host | Answer |
|---|---|---|
| ANAME | leave empty | Replace the capitals with your own value from the host's dashboard. |
| CNAME | Replace the capitals with your own value from the host's dashboard. |
Step by step
Set it up
- 1
Add the domain in Render first
In Render, go to Service→Settings→Custom Domains→Add Custom Domain and enter your domain (for example www.example.com). Adding the bare domain also adds www and redirects it to the bare domain.
Each workspace includes custom domains (2 on Hobby, more on paid plans).
- 2
Open the DNS records at Name.com
Sign in, then go to My Domains→your domain→Manage DNS Records
The domain has to use Name.com's nameservers.
- 3
Clear what's in the way
Remove any URL forwarding or parking records on @ and www before adding yours.
- 4
Add the record for www
Click Add Record and add:
- Type
- CNAME
- Host
- Answer
Replace the capitals with your own value from the host's dashboard.
Type Host Answer CNAME Replace the capitals with your own value from the host's dashboard.
- 5
Point the bare domain
Name.com has an ANAME record, which can point the bare domain at a hostname. It keeps working if Render changes its addresses.
- Type
- ANAME
- Host
- leave empty
- Answer
Replace the capitals with your own value from the host's dashboard.
Type Host Answer ANAME leave empty Replace the capitals with your own value from the host's dashboard.
- 6
Wait, then check
Changes at Name.com take effect within an hour, sometimes up to 24 hours. Once Render sees the records, it issues the certificate for https by itself. Use the check below to see what the world sees.
Check your domain
Once the records are in, see whether the world can see them pointing at Render.
Changes can take from a few minutes to a day to show up everywhere.
Good to know
Common snags
- Remove any AAAA records for the domain while you set it up: Render uses IPv4 only.
- Leave Host empty for the bare domain.
Still not working?
Questions
Before you start
Should I use www or the bare domain with Render?
Adding the bare domain also adds www and redirects it to the bare domain. www always works with a single CNAME; the bare domain depends on what Name.com offers, covered in step 5.
Why does my site show a certificate error?
The certificate is issued once Render sees your records, which can take a while after DNS changes. If it stays, check for old records on the same name (parking pages, AAAA records) and, at Cloudflare, that the record is set to DNS only.
Will this affect my email?
No. Email uses MX records, which these steps don't touch. Only change the records for @ and www.
Rather skip git and build settings?
99helpers puts a file, a folder or a built site online in seconds, then a single CNAME connects your domain, with passwords, analytics and AI editing built in.
Connect a Name.com domain to 99helpersOr skip the setup
Drop it in. It's online in seconds.
A file, a folder or a whole site: 99helpers puts it online at its own address, with no git, no build settings and no DNS to start with. Add your own domain whenever you're ready.